Discontinued Part Sourcing: How to Find the Original, Then Screen an Alternative
Discontinued part sourcing starts with the original part, not a replacement. First confirm the discontinuance and the last time buy date, then search for original stock. Only when the original cannot cover the build do you screen an alternative, and only an engineer can approve it. This guide works through a real case, a TI operational amplifier named in a 2025 discontinuance notice.
Home / News / Discontinued Part Sourcing: How to Find the Original, Then Screen an Alternative
November 2026
What Should You Do First When a Part Is Discontinued?
A discontinued part is a part the maker has announced it will stop producing. The announcement comes as a product discontinuance notice, or PDN, and it names a last date to order.
The first move is not to search for a replacement. It is to freeze the facts: the full part number with its suffix, the quantity the build still needs, and the date the production line runs out of stock.
In the case below, the part is the OPA404AG, a TI operational amplifier. TI named it in discontinuance notice 20251218007.3, dated Dec 19, 2025, with a last date to order of Dec 18, 2026. While that window is open, a last time buy is still possible.
The first day of work is counting and confirming, not buying. A last time buy placed late can miss the date, and a replacement approved in a hurry can fail in test.
How Do You Confirm a Part Is Really Discontinued?
Check the maker product page first. TI marks each part ACTIVE, NRND, or OBSOLETE. A distributor listing that says zero stock does not prove a part is discontinued. It only proves that one seller has none.
Then read the discontinuance notice itself. The notice gives the PDN number, the list of affected part numbers, the last date to order, and the recommended replacement, if the maker names one. For the OPA404AG, notice 20251218007.3 gives Dec 18, 2026 as the last date to order and names the OPA4140AIDR as the recommended replacement. The full notice is published as a TI product discontinuance notice.
Keep the notice with the enquiry record. When a supplier quotes the part later, the notice shows whether the quote is a last time buy or old stock.
Where Do You Look for the Original Part First?
Search in this order. First, the maker and its authorized distributors, for a last time buy or stock on hand. Second, authorized stock already held by distributors. Third, independent stock, where the seller must prove where the parts came from.
Count the need before you search. Total quantity is quantity per set times number of sets, plus spares. A buyer who searches for 500 pieces and later learns the build needs 2,000 has wasted the first search.
If the original covers the full build, stop there. Buying the original needs no design change and no new test. The alternative only enters the plan when the original falls short. If the part sits on a wider list, send the whole list through BOM Kitting so every line is quoted together.
How Do You Check Original Stock Before You Buy It?
Ask for four facts before you pay: the date code, the lot code, a photo of the part marking and the label, and a certificate of conformance that names the part, the quantity, the lot, and the date code.
Check that the codes match. The date code and lot code on the parts should match the label and the delivery documents, and one reel or tray should carry one date code, not a mix. Our guide to date codes and lot codes explains the formats.
Visual checks catch marking errors, wrong labels, and mixed lots. They cannot prove the silicon inside the package is genuine. That limit is why traceability matters more than appearance. The warning signs are listed in our guide to counterfeit components.
Hold the delivery when the documents do not match the parts. Sorting mixed lots after they reach the line costs more than waiting one day.
When Should You Move From the Original to an Alternative?
Move to an alternative when one of three facts is true. One, the original stock found covers less than the build need, including spares. Two, the price or the delivery date breaks the build budget or the build schedule. Three, the seller cannot prove where the stock came from.
If none of the three is true, stay with the original. Screening an alternative costs engineering time, a sample order, and a test run. A buyer who switches early pays that cost for no reason.
In the OPA404AG case, the last time buy window runs to Dec 18, 2026. A buyer with a firm build quantity can still order the original through that window, and that is the cheaper path. A buyer whose build runs past the window must start the alternative screen while the original still covers current production.
How Do You Screen an Alternative Before an Engineer Approves It?
Screening is a comparison, not a guess. Compare function, key electrical values, package and footprint, pinout, supply voltage range, and temperature range. A part that matches on function but not on package still needs a board change.
The PDN for the OPA404AG names the OPA4140AIDR as the recommended replacement and states at the same time that it is not in the same package, with pin to pin match marked No. A maker recommendation is a starting point, not an approval. The same notice matches the THS3061D to the THS3091DDAR with pin to pin match marked Yes, which is a stronger starting point, and still needs an engineer to confirm it.
| Discontinued Part | Recommended Replacement | Pin to Pin Match |
|---|---|---|
| OPA404AG | OPA4140AIDR | No, different package |
| THS3061D | THS3091DDAR | Yes |
Both rows come from TI discontinuance notice 20251218007.3. Send the comparison to the engineer, not the decision. Only the engineer can approve the change. Our guide to evaluating component alternatives lists the checks in full.
What Should You Send a Supplier With a Discontinued Part Enquiry?
Send one message with everything the supplier needs to quote: the full part number with its suffix, the total quantity with the maths shown, the target date code range, the packaging, the delivery location, and whether an alternative may be quoted.
- Full part number with its suffix.
- Total quantity, with quantity per set times number of sets plus spares shown.
- Target date code range.
- Packaging.
- Delivery location.
- Whether an alternative may be quoted, and what the engineer must approve.
- The PDN number, so the supplier can check the same notice.
Name the PDN number in the enquiry. It tells the supplier you have read the notice, and it stops the supplier quoting a part the maker no longer sells as if it were current stock.
Keep the enquiry open on both paths. Ask for the original first, and ask for the screened alternative as a second line, clearly marked as needing engineer approval. That way one enquiry returns both prices. For a part that must keep a legacy product running, the wider plan is covered in our guide to keeping a legacy product in production.
What Do Buyers Ask Next?
How do I know if a part is really discontinued?
Check the maker product page for its status, then read the discontinuance notice for the PDN number and the last date to order. Zero stock at one distributor does not prove a part is discontinued.
Should I buy the original or switch to an alternative?
Buy the original first. Switch only when the original cannot cover the build, when its price or delivery date breaks the plan, or when its source cannot be proven.
What is a last time buy?
A last time buy is the final order window the maker offers after a discontinuance notice. Orders must be placed before the last date to order, and the maker states the order cannot be cancelled or refunded.
Is a maker recommended replacement always a drop in replacement?
No. The notice for the OPA404AG recommends the OPA4140AIDR and marks pin to pin match as No, because it is not in the same package. Only an engineer can approve it.
What should I ask for before I pay for original stock?
The date code, the lot code, a photo of the part marking and the label, and a certificate of conformance. Check that the codes on the parts match the label and the documents.
Related Reading
Keeping a Legacy Product in Production When Parts Go Obsolete
How to Evaluate Component Alternatives
Written by Casey Xia
Casey Xia handles component sourcing enquiries at Potrgo, covering BOM quotation, shortage lines, and alternatives screening. These articles collect the checks and decisions behind that work. More about the author · Casey Xia on LinkedIn
